A commercial printing company has been fined £100,000 after an employee’s hand was crushed by a laminating machine.

The man had been working for Celloglas Limited at the firm’s site at Cross Green Industrial Estate in Leeds.

He was attempting to fix a laminating machine on 25 November 2020 when his right hand was drawn into the device and crushed between two rollers. The worker, who was 31 at the time, realised the machine had broken while he was feeding the device with paper.

The incident led to the man’s right hand sustaining soft tissue crush injures as well as nerve damage and contact burns to his right wrist. The injuries to his hand meant the man could not drive for seven months following the incident and also led to him suffering with anxiety and PTSD.

A Health and Safety Executive (HSE) investigation into the incident found the laminating machine was not adequately guarded and that the company failed to review existing risk assessments for the machine which required the production of a safe system of work.

HSE guidance can be found at: Managing risks and risk assessment at work – Overview -HSE

Celloglas Ltd, of Exeter Way, Theale Commercial Estate, Theale, Reading, pleaded guilty to breaching Section 2 (1) of the Health & Safety at Work etc Act 1974. The company was fined £100,000 and ordered to pay £5,165.09 in costs at Leeds Magistrates’ Court on 30 August 2023.

HSE inspector Darian Dundas commented: “A review of existing risk assessments for the machine should have identified that a safe system of work was required to keep operatives safe from harm. Had such a review taken place then this incident could so easily have been avoided.”

This HSE prosecution was supported by HSE enforcement lawyer Gemma Zakrzewski.

Notes to Editors:

1. The Health and Safety Executive(HSE) is Britain’s national regulator for workplace health and safety. We prevent work-related death, injury and ill health through regulatory actions that range from influencing behaviours across whole industry sectors through to targeted interventions on individual businesses. These activities are supported by globally recognised scientific expertise.
2. More information about the legislation referred to in this case is available.
3. Further details on the latest HSE news releases is available.

A plant hire company has been fined for leaving workers at risk of a fall from height and failing to provide minimum welfare facilities.

Blackpool Magistrates’ Court heard how, on 17 November 2020, Ruttle Plant (Birmingham) Ltd was in the process of building a new aggregate recycling facility at their site at Common Bank Lane, Chorley. Part of the work included the provision of cladding to the roof, which was carried out using a cherry picker. However, as some areas of the roof were difficult to reach, employees had to step onto the roof where no edge protection had been provided, putting them at risk of a 30ft fall. In addition, workers had been on site for some considerable time without the minimum required welfare facilities being available. This included facilities for hand washing during the height of the Covid pandemic.

An investigation by the Health and Safety Executive (HSE) found that the workers had been left unsupervised by site management, there had been no method statement to follow when they climbed onto the roof and there were no preventative measures in place to prevent the risk of a fall from height. Workers were also expected to drive to the company’s head office along an unadopted roadway more than five minutes’ drive away to use the toilet, despite there being ample room on the site for facilities.

Ruttle Plant Hire (Birmingham) Ltd of Lancaster House, Ackhurst Road, Chorley, Lancashire pleaded guilty to breaches of Regulation 13(4)(c) of the Construction (Design and Management) Regulations 2015, and Regulation 4(1) of The Work at Height Regulations 2005. The company was fined £66,667 and ordered to pay costs of £1,847.

Speaking after the hearing, HSE inspector Christine McGlynn said: “Had a worker fallen off the roof edge, it could have been fatal. Employers should ensure that workers are not left to carry out high risk roof work without supervision.

“Work at height and roof work should only be carried out by trained workers, who are being robustly monitored, following proper planning, risk assessment and using suitable equipment. The minimum standards for welfare must also be met.”

Notes to Editors:
1. The Health and Safety Executive (HSE) is Britain’s national regulator for workplace health and safety. We prevent work-related death, injury and ill health through regulatory actions that range from influencing behaviours across whole industry sectors through to targeted interventions on individual businesses. These activities are supported by globally recognised scientific expertise. www.hse.gov.uk
2. More about the legislation referred to in this case can be found at: Construction- Roof work industry health and safety 
3. HSE news releases are available at http://press.hse.gov.uk