JC Bamford Excavators Ltd has been fined after a worker was left with multiple injuries after being crushed during the assembly of a telescopic handler.
Roger Pearce, 56, of Newcastle-under-Lyme, was installing the vehicle’s offside light and mirror arm at the firm’s Lakeside works in Rocester, Staffordshire, when the incident happened on 3 June 2013.
Staffordshire Magistrates’ Court today (14 January) heard Mr Pearce had to crouch down so could not be seen by a colleague testing the steering, resulting in him being crushed between a wheel and the bodywork.
He fractured ten ribs; damaged the bones at the base of his spine, and injured his bladder and kidney. He was hospitalised for ten days and is still undergoing treatment. He has not been able to return to work.
A Health and Safety Executive (HSE) investigation identified that, at the time of the incident, there was a designated area of the assembly track where hydraulic fluids were pumped into the machine and steering and other systems operated to force the fluids through the system.
HSE found the assembly sequence for the telescopic materials handler was changed, which led to the fitting of the front offside light and mirror arm being moved from a point when the hydraulics were not live, to a point when the hydraulics were live and functions such as steering were tested.
JC Bamford Excavators Ltd, of Lakeside Works, Denstone Road, Rocester pleaded guilty to breaching Section 3(1) of the Health and Safety at Work etc Act 1974 and Regulation 3(1)(b) of the Management of Health and Safety at Work Regulations 1999 and was fined £25,000 and ordered to pay £1,390 in costs.
After the hearing, HSE inspector David Brassington said:
“This was a serious incident with Mr Pearce sustaining injuries from which he has yet to recover.
“It was also a preventable incident. JCB had allowed the introduction of a serious hazard and failed to assess the risk from this change. The controls that were in place were inadequate and Mr Pearce suffered serious harm as a result.
“Since the incident, the fitting of the light and mirror arm has been moved back to earlier in the assembly sequence when the hydraulics are not operational. Other changes have included barriers around the assembly area and the introduction of a banksman to control personnel working within it.
“The risks associated with the manufacturing processes involving large pieces of powered equipment should be assessed to ensure that there are effective controls and safe work procedures to protect those involved in this work.”
Notes to Editors
- Section 3(1) of the Health and Safety at Work etc act 1974 states: It shall be the duty of every employer to conduct his undertaking in such a way as to ensure, so far as is reasonably practicable, that persons not in his employment who may be affected thereby are not thereby exposed to risks to their health or safety.”
- Regulation 3(1)(b) of the Management of Health and Safety at Work Regulations 1999 states: “Every employer shall make a suitable and sufficient assessment of the risks to the health and safety of persons not in his employment arising out of or in connection with the conduct by him of his undertaking.”