Social media

Javascript is required to use HSE website social media functionality.

Firm fined for worker’s death at paper mill

Date:
11 August 2015

A company has been fined following the death of a worker who became trapped in unguarded machinery at a Devon paper mill.

John Stoddart, 42, who lived in Cullompton, was attempting to smooth out felt on a conveyor at the Higher Kings Mill in the town when he was pulled into the machinery causing fatal injuries on 24 September 2011.

The incident was investigated by the Health and Safety Executive (HSE) which prosecuted Mr Stoddart’s employer, DS Smith Paper Ltd, at Exeter Crown Court today.

The court heard that Mr Stoddart, who was the company’s operations manager, was trying to identify a problem that was causing creases in the large rolls of industrial paper being produced.

Following the practice of some other workers in the factory when similar situations occurred, he climbed onto a work platform to check if the creases were caused by problems on a large, moving felt belt, used to squeeze water out of the pulp mixture.

Although no-one saw what exactly happened to Mr Stoddart, it is likely he was dragged onto the felt belt which then ripped and he fell into the machinery below, causing fatal crush injuries. He was pronounced dead at Royal Devon and Exeter hospital having been taken there by an ambulance.

HSE’s investigation found the company had failed to place any guard around the belt and did not have a suitable risk assessment for work which needed to be carried out to find the cause of creases and for working on the gantry.

DS Smith Paper Ltd, of Euston Road, London, pleaded guilty to a breach of the Provision and Use of Work Equipment Regulations 1998 and was fined a total of £400,000 and ordered to pay £34,761.67 in costs.

HSE Inspector, Simon Jones, speaking after the hearing, said:

“DS Smith’s failure to guard a dangerous piece of moving machinery tragically cost Mr Stoddart his life and has left his family without a husband, father and brother.

“Potentially dangerous machinery should always be guarded and turned-off when workers need access to repair faults.

“A proper risk assessment would have highlighted these dangers and established safe practices for staff instead of putting their lives at risk.”

Further information about guarding machinery can be found on the HSE website at http://www.hse.gov.uk/fee-for-intervention/basic-safety-mistakes/guards.htm

Notes to Editors:

  1. The Health and Safety Executive is Britain’s national regulator for workplace health and safety. It aims to reduce work-related death, injury and ill health. It   does so through research, information and advice; promoting training; new or revised regulations and codes of practice; and working with local authority partners by inspection, investigation and enforcement. www.hse.gov.uk
  1. Regulation 11(1) of the Provision and Use of Work Equipment Regulations 1998 states: “Every employer shall ensure that measures are taken…which are effective to prevent access to any dangerous part of machinery or to any rotating stock-bar, or to stop the movement of any dangerous part of machinery or rotating stock-bar before any part of a person enters a danger zone.”
  1. HSE news releases are available at press.hse.gov.uk

Media contacts

Journalists should approach HSE press office with any queries on regional press releases.