Social media

Javascript is required to use HSE website social media functionality.

South East London firm fined for skip move failings

9 October 2013

A Bexley company has been fined after a forklift truck overturned during a risky and poorly planned operation to move and empty a skip.

The operator of the forklift escaped injury in the incident at Midland Steel Reinforcement Supplies (GB) Limited, on Fishers Way, Belverdere, on 13 September 2011, but he was fortunate to do so.

The firm, which supplies reinforced steel bars (rebar) to the construction industry, was prosecuted today (9 October) by the Health and Safety Executive (HSE) after an investigation identified safety failings.

Westminster Magistrates’ Court heard that the worker was told to empty bins at the site, an instruction he understood to include small skips containing offcuts of rebar.

He used a forklift truck to lift and move one of the skips to a larger waste container and balanced it on the edge. He then retracted the forks of the forklift and used them to tip the skip and empty the contents within.

The worker then jumped from the cab and into the waste container in order to attach a sling to the empty skip and the forks of the forklift so that he could pull and lift it back out. He climbed back into the cab and attempted to do so but the forklift overturned, with the lifting column coming to rest on the edge of the container.

The fact it didn’t hit the ground created a small gap between the cab and the floor that the operator was able to crawl through.

HSE found that the system and method of work was unsuitable and posed clear risk, not least because the operator of the forklift was untrained and unsupervised.  Inspectors also found that he wasn’t wearing a seatbelt when the forklift overturned – making it all the more remarkable that he avoided harm.

Magistrates were told that a safer method was available to empty the waste steel rebars in the form of tipper skips, which were in use elsewhere at the site.

Midland Steel Reinforcement Supplies Limited, of Fishers Way, Belverdere, was fined a total of £17,500 and ordered to pay £11,000 in costs after pleading guilty to two separate breaches of the Provision and Use of Work Equipment Regulations 1998.

After the hearing HSE Inspector Maria Strangward commented:

“The forklift truck should have never have been used to lift and manoeuvre the skip in this way. It was a system and method of work that posed clear risk, and the worker is extremely fortunate to avoid being seriously injured – possibly even killed had the forklift struck and crushed him as it overturned.

“The onus is on employers like Midland Steel Reinforcement Supplies to ensure operations are properly planned, managed and supervised, and that adequate training, instruction and equipment is provided to at all times to protect workers.”

Further information on working safely with forklift trucks can be found online at

 Notes to Editors

  1. The Health and Safety Executive is Britain’s national regulator for workplace health and safety. It aims to reduce work-related death, injury and ill health. It does so through research, information and advice; promoting training; new or revised regulations and codes of practice; and working with local authority partners by inspection, investigation and enforcement.
  2. Regulation 4(3) of the Provision and Use of Work Equipment Regulations 1998 states: “Every employer shall ensure that work equipment is used only for operations for which, and under conditions for which, it is suitable.”
  3. Regulation 9(1) states: “Every employer shall ensure that all persons who use work equipment have received adequate training for purposes of health and safety, including training in the methods which may be adopted when using the work equipment, any risks which such use may entail and precautions to be taken.”


Media contacts

Journalists should approach HSE press office with any queries on regional press releases.